Conveyor Lighting Solutions To Guarantee The 24 Hours Operation For High Economic Benefit For Mining

Mining industry has four segments covering underground mining, open-cast mining (open-pit), placer mining, and in-situ mining. Underground mining is to open one or more shafts into the earth that intercept coal seams. Open-cast mining covers a large area on the ground and continually changes its shape as mining proceeds. Accurate mining lights can offer the effective illumination required to achieve production and safe operation. SUREALL helps you mitigate risk, minimize complexity and shorten challenging lead times.

Sheet metal is produced from feed metals like aluminum, brass, and copper into thin sheets through the melting process, the pouring process, the pickling process, the rolling process, and the annealing process. In such an excessive heat and harsh environment, high heat resistant led lights can be rugged and reliable enough to withstand the extreme, changing conditions, while also maintaining the entire operation area visual. Once in this metal industry where uptime is critical, we'll help give you the confidence you need in the efficiency and safety of your operation.

What lights are used in mines?

Mines are constructed to exploit coal and metal ores. When we talk about coal mines, hazardous gas methane is released as a direct result of the physical process of coal extraction and the concentration of methane can not be well controlled even enough ventilation work continuously, in order to eliminate the ignition source from lighting fixtures, coal mines must install Class M explosion proof mine lights (Group I). Whereas, you can use Class 1 explosion-proof mining light (Group II) for other hazardous location miners excluding coal mines.

What is the standard of lighting in underground & opencast mines?

For underground mines, the lighting system should be explosion-proof lighting, featuring lightweight and easy installation. When you plan to light for opencast mines, even led mining light can be used to withstand high mechanical impact and corrosion as below:

• Underground mining headlamps, Class 1 Div 1, aluminum alloy, explosion proof led flashlight, SPL-F Series to be used as lighting for mines and carried by hand for miners underground(not coal mine)

• Mining lights, Class 1 Div 2, aluminum alloy, explosion-proof portable led work light, SPL-E Series to be used as mining floodlights and moved to anywhere you need for opencast mines.

• Led light mine, Nema 4X, aluminum alloy, industrial mining floodlight, PFM-A series to be used for area illumination for opencast miners.

What equipment is used for mining?

Mining can happen at the surface or underground. Surface mining is a common method for non-fuel minerals. The mining environment dictates the required equipment consists of extraction and material handling equipment. Extraction equipment like dragline excavators, excavator shovels, and bucket-wheel excavators is used to drill, blast, or dig to remove materials from the mine site. Material handling such as wheel tractor scrapers, bulldozers, and mining truckss are applied for sorting and loading materials to a waste area or the processing site.

what does mining equipment lighting include?

Wherever you are mining, to improve the productivity and enhance the safety management, mining equipment lighting including conveyor lights, hoist lights, industrial machine lights, excavator lights, and forklift lighting may be used for reducing the downtime as below:

• Conveyor lighting, Class 1 Div 2, aluminum alloy, explosion-proof high bay lighting, SVM Series to be used as machine lighting at two sides of conveyor belts.

• Led excavator lights, Class 1 Div 2, aluminum alloy, explosion-proof floodlighting, SHF-II series to be used as digger night light on the excavator.

• Forklift safety lights, Class 1 Div 1, aluminum alloy, explosion-proof alarm light, SAV series to be used as forklift warning lights on the forklift.

What is a metal casting workshop?

Metal casting workshops are designed for the manufacturing process in which a liquid melting metal material is usually poured into a mold, made in plaster or clay, which contains a hollow cavity with a desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Metal casting workshop is inherently enveloped with high heat and temperatures even though ventilation system can transfer excessive heat, our high temperature led lights can withstand up to 158℉.

What temperature can LED lights handle?

Industrial workshops maintain low or high temperatures depending on the manufacturing procedures. SUREALL industrial led light can be used in ambient temperatures from -40℃(-40℉) to +55℃(131℉), we also develop industrial high-temperature light to work in +70℃(158℉) as below:

• High-temperature light, -40℃(-40℉) to +70℃(158℉), NEMA 4X, aluminum alloy, industrial high temperature resistant light fittings, IHB-T series to be used as high temperature led in the metal melting and casting workshop.

• High-temperature high bay led lighting, -40℃(-40℉) to +55℃(131℉), NEMA 4X, aluminum alloy, industrial high bay lighting, IHB-H series to be used in the metal rolling workshop.

• High temp industrial lighting, -40℃(-40℉) to +55℃(131℉), NEMA 4X, aluminum alloy, industrial floodlight, PFM-A series to be used in the metal annealing workshop.