Class I Div 1 Lighting, Explosion Proof Led Lighting Class 1 Division 1

Class I Division I means the project site may produce combustible gas, vapor normally when the project operates, here are some recommended explosion proof lighting, control box and fittings for your options subject to NEC UL and CSA standard.

What is A Class 1 Div 1 Area?

Class 1 Div 1 Definition

In Simple Word

Class 1 Div 1 location, C1D1 for short, Class 1 Division 1 for full name, means ignitable concentrations of hazards, such as flammable vapors and gases, exists under normal operation conditions, and/or where hazard is caused by frequent maintenance or repair work or frequent equipment failure.

In Quantitative Measurement

Class 1 Div 1 location means ignitable concentrations of hazards, such as flammable vapors and gases, present more than 10 hours every year.

Class 1 Division 1 Electrical Requirements
In Accordance with NEC Article 500

A Class 1, Division 1 location is a location:

In which ignitible concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors can exist under normal operating conditions

In which ignitible concentrations of such flammable gases, flammable liquid-produced vapors, or combustible liquids above their flash points may exist frequently because of repair or maintenance operations or because of leakage

In which breakdown or faulty operation of equipment or processes might release ignitible concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors and might also cause simultaneous failure of electrical equipment in such a way as to directly cause the electrical equipment to become a source of ignition

C1D1

UL/Intertek

Nema4X



Explosion Proof Lighting



Explosion Proof Boxes



Explosion Proof Fittings

Explosion Proof High Bay Lighting

Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SHB Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 30-240W

Type 4X, IP66

View More

Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SHB Series

Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SO-I Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 30-150W

Type 4X, IP66

View More

Explosion Proof Led High Bay Lights Class 1 Div 1 Zone 1 SO-I Series

Explosion Proof Flood Light

Explosion Proof Led Flood Light Class 1 Div 1 Zone 1 SHF-IA Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 20-200W

Type 4X, IP66

View More

Explosion Proof Led Flood Light Class 1 Div 1 Zone 1 SHF-IA Series

Explosion Proof Led Street Light Class 1 Div 1 Zone 1 SSL Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 80-300W

Type 4X, IP66

View More

Explosion Proof Led Street Light Class 1 Div 1 Zone 1 SSL Series

Explosion Proof Fluorescent Lighting

Explosion Proof Led Linear Fluorescent Lights Class 1 Div 1 Zone 1 SLL-I Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 20-120W

Type 4X, IP66

View More

Explosion Proof Led Linear Fluorescent Lights Class 1 Div 1 Zone 1 SLL-I Series

Explosion Proof Emergency Lighting

Explosion Proof Led Emergency Bug-eye Lights SEG Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 2x5W

Type 4X, IP66

View More

Explosion Proof Led Emergency Bug-eye Lights SEG Series

Explosion Proof Led Emergency Exit Sign Lights SES Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP66

View More

Explosion Proof Led Emergency Exit Sign Lights SES Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP66

View More

Explosion Proof Alarm Lights SAV Series

Explosion Proof Flashlight

Explosion Proof Led Class 1 Div 1 Flashlight SPL-A Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 2x5W

Type 4X, IP67

View More

Explosion Proof Led Class 1 Div 1 Flashlight SPL-A Series

Explosion Proof Led Class 1 Div 1 Torch Lights SPL-B Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP65

View More

Explosion Proof Led Class 1 Div 1 Torch Lights SPL-B Series

Explosion Proof Led Division 2 Flashlight SPL-C Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP68

View More

Explosion Proof Led Division 2 Flashlight SPL-C Series

Explosion Proof Led Flashlight Portable Search Lights SPL-D Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 2x5W

Type 4X, IP65

View More

Explosion Proof Led Flashlight Portable Search Lights SPL-D Series

Explosion Proof Led Flashlight Portable Work Lights SPL-E Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP65

View More

Explosion Proof Led Flashlight Portable Work Lights SPL-E Series

Explosion Proof Led Flashlight Portable Headlamp SPL-F Series

Class I Division 1

Zone 1&2, Zone 21&22

LED 5W

Type 4X, IP67

View More

Explosion Proof Led Flashlight Portable Headlamp SPL-F Series

Explosion Proof Switch

Explosion Proof Lighting Switch SW-A Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.32A

Type 4X, IP66

Built-in Switch

View More

Explosion Proof Lighting Switch SW-A Series

Explosion Proof Junction Box

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.32A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Junction Box Flameproof Junction Box Exd SJB-IIB Series

Explosion Proof Junction Box Flameproof Junction Box Exd SJB-IIC Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.32A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Junction Box Flameproof Junction Box Exd SJB-IIC Series

Explosion Proof Junction Box Exd 11b Junction Box SJB-A-IIB Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.400A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Junction Box Exd 11b Junction Box SJB-A-IIB Series

Explosion Proof Junction Box Exd Junction Box SJB-A-IIC Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.250A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Junction Box Exd Junction Box SJB-A-IIC Series

Explosion Proof Panel

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.630A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Panel Ex d 11b Explosion Proof Panelboards SPN-d-IIB Series

Explosion Proof Panel Ex d Hazardous Location Panel SPN-d-IIC Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.250A

Type 4X, IP66

Built-in Terminal blocks

View More

Explosion Proof Panel Ex d Hazardous Location Panel SPN-d-IIC Series

Explosion Proof Enclosure

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.1200A

Type 4X, IP66

View More

Explosion Proof Enclosure Exd 11b Class 1 Div 1 Enclosure SEE-IIB Series

Explosion Proof Enclosure Exd 11c Class 1 Div 1 Enclosure SEE-IIC Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.630A

Type 4X, IP66

View More

Explosion Proof Enclosure Exd 11c Class 1 Div 1 Enclosure SEE-IIC Series

Explosion Proof Receptacle

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

＜125A

Type 4X, IP66

View More

Explosion Proof Receptacle Flame Proof Socket and Plug SSP-A Series

Explosion Proof Cable Gland

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.M75x1.5(NPT 2 1/2")

Type 4X, IP66

Mental

View More

Explosion Proof Cable Gland Flameproof Cable Gland SGM Series

Explosion Proof Cable Gland Hazardous Area Cable Glands SGN Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.M75x1.5(NPT 2 1/2")

Type 4X, IP66

Non-armored

View More

Explosion Proof Cable Gland Hazardous Area Cable Glands SGN Series

Explosion Proof Cable Gland Hazardous Area Cable Glands SGA Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.M75x1.5(NPT 2 1/2")

Type 4X, IP66

Armored

View More

Explosion Proof Cable Gland Hazardous Area Cable Glands SGA Series

Explosion Proof Connector

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Adaptors SA Series

Explosion Proof Connector Explosion Proof Reducing Bushing SR Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Explosion Proof Reducing Bushing SR Series

Explosion Proof Connector Explosion Proof Unions SU Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Explosion Proof Unions SU Series

Explosion Proof Connector Elbows SE Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Elbows SE Series

Explosion Proof Connector Conduit Hubs SH Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Conduit Hubs SH Series

Explosion Proof Connector Class 1 Div 2 Liquid Tight Connectors SL Series

C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.115x1.5(NPT 4")

Type 4X, IP66

View More

Explosion Proof Connector Class 1 Div 2 Liquid Tight Connectors SL Series

Explosion Proof Conduit Fittings

Explosion Proof Sealing Fittings Couplings SCS Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.63x1.5(NPT 2")

Type 4X, IP66

View More

Explosion Proof Sealing Fittings Couplings SCS Series

Explosion Proof Flexible Conduit Couplings SFC Series

C1D1, C1D2, C2D1, C2D2

Zone 1&2, Zone 21&22

Max.63x1.5(NPT 2")

Type 4X, IP66

View More

Explosion Proof Flexible Conduit Couplings SFC Series

FAQ for Class 1 Div 1

Does Class 1 Div 1 require explosion-proof?

Yes, Class 1 Div 1 require explosion proof. Based on Class 1 Div 1 definition, Class 1 Div 1 is the most stringent safety grade among all explosion proof grades since the existing frequency of hazardous gas is very high, the lighting fittings should be enable to contain the explosion through a high impact resistance enclosed housing, Class 1 Div 1 MUST require explosion proof.

What is a Class 1 Division 1 hazardous location? What is C1D1 certification?

C1D1 is the abbreviation of Class 1 Division 1, class i division 1. Class i Division 1 hazardous locations have serious possibility to form an explosive environment asking for forced explosion proof protection for electrical device. C1D1 certification involves in UL certified and other issue body such as Intertek certificated in accordance with C1D1 classification from the same NEC article 500 standard.

FAQ for Explosion Proof LightingClass 1 Div 1

FAQ for Explosion Proof High Bay Lighting Class 1 Div 1

What is the difference between Class 1 Div 1 and Div 2?

Class 1 Div 1 equals to C1D1, Class 1 Div 2 equals to C1D2. Both Class 1 Div 1 and Class 1 Div 2 belong to the Class 1 hazards, flammable gas , vapors according to class 1 division 1 electrical requirements and class 1 division 2 electrical requirements, the main difference is only the existing frequency of hazards, C1D1 present for more than 10 hours every year, C1D2 present ranges from 1 hour to 10 hours every year.

Does ethanol extraction require C1D1?

No, ethanol extraction require C1D2 only. Even ethanol is a kind of volatile and flammable liquid, it is not classified into typical hazards within class 1 group and can be considered “Not Very Hazardous” to be easily ignited under normal processing procedures, you can still require C1D1 for ethanol extraction, but it is not mandatory, ethanol extraction require C1D2 in practical application.

What is a Class 1 hazardous location?

A “Class I” hazardous location may form under the presence of flammable gases or vapors in the air in sufficient concentration to be explosive or ignitable. When these materials appear in this so-called “Class 1 environment”, a potential for explosion exists if an electrical or other source of ignition is present. Electrical classification class 1 covers Class 1 Division 1 rating and Class 1 Division 2 rating.

Lighting The Way To Safety! Choose SUREALL, Sure For All!

Want to Get High-quality LED lighting, explosion proof lighting and other explosion-proof fittings? Welcome to SUREALL