Lighting With Low Consumption Enhancing Productivity, Positivity

What is OSHA definition of a confined space?

According to OSHA regulation 29 CFR 1910.146, "Confined space" should meet all there three factors and exactly means: (1) is large enough and so configured that an employee can bodily enter and perform assigned work and (2) Has limited or restricted means for entry or exit (for example, tanks, vessels, silos, storage bins, hoppers, vaults, and pits are spaces that may have limited means of entry.) and (3) is not designed for continuous employee occupancy. A confined space is any enclosed or partially enclosed structure that normally contains a potentially hazardous atmosphere.

Which light is used in confined space?

Confined spaces are likely to exist explosive or flammable gas or dust widely applied in oil, gas, energy, metallurgy, machines, hazmat industry, thus, confined space light is explosion-proof lighting in the most cases designed with light-weight and small dimensions to be carried by hand through the narrow opening, tight spaces, here are some of our recommendations as below:

• Lighting in confined space, Class 1 Div 1, explosion-proof flashlight SPL-B series to be used for confined space illumination in-tank confined space.

• Lightly used in confined space, Class 1 Div 1, explosion-proof flashlight SPL-C series based on confined space lighting requirements in vessels confined space.

• Confined space lighting 24vdc, Class 1 Div 1, 24V DC, explosion-proof portable headlamp SPL-F series to be used as 24volt light for confined space in silos confined space.

What is the pit in a garage called?

The pit in a garage is a so-called garage pit, inspection pit, service pit, or maintenance pit, a concrete-lined designed cavity or hole often sunken below the ground, offering access to the underside and chassis of your vehicles, allowing you sufficient space to inspect and well-lit comfort for precise maintenance. Garage pits are constructed to eliminate the need for costly and risky lifting machines and lower the hazardous level of the working environment through the natural airflow. Since flammable gas such as fuel, and diesel exist in garage pits, pit lights are normally explosion-proof lighting to avoid the explosion.

What is the best service pit light?

Maintenance service for buses, diesel trucks, trailers, and even trains can be a challenging and formidable task, proper illumination is imperative with clear visibility for these service and repair tasks, but service pit lights should be designed to withstand the rugged environment and slim space as below:

• Led pit light, Class 1 Div 1, explosion-proof flashlight SPL-D series to be used as portable searching light in service pit.

• Pit lights for workshop, Class 1 Div 1, aluminum alloy housing, proof led linear lights SLL-I series to be used as led auto shop light in maintenance pit.

• Pit lights for trailer, Class 1 Div 2, aluminum alloy housing, explosion proof led linear lights SLL-II series to be used as trailer pit light in maintenance pit.

What are maintenance and inspection lights?

Maintenance inspection lights are lighting fixtures to provide sufficient visual illumination for inspectors to evaluate the surface or inner condition of equipment, identify imperfections or minor issues before they start costly repairs, and determine what tools, materials, and methods are needed to keep machines working and reduce the downtime. Inspection lighting should be as portable and convenient as possible to be carried from one location to another for temporary lighting, long-lasting with a backup battery or plug-in power when no nearby electricity.

What type of lighting is best for inspection?

Led inspection lighting is the best inspection light for inspection such as safety inspection, failure inspection, electrical inspection, quality inspection, varied lighting types for options on the basis of the exact inspection operation, such as explosion-proof lighting for hazardous inspection location, industrial lighting for corrosive inspection area as below:

• Inspection torch, Class 1 Div 1, explosion-proof flashlight SPL-A series to be used as inspection flashlights in fuel hazardous location inspection areas.

• Paint inspection light, Class 1 Div 1, GRP housing, explosion-proof non-metallic led linear light SLE series to be ceiling mounted at the ceiling of paint inspection room.

• Rechargeable inspection light, NEMA 4X, Portable work light PWL series to be used as rechargeable led inspection light at non-hazardous quality inspection areas.

What is site lighting?

Site lighting is the whole name of lighting fixtures mounted on the ground on-site to provide proper illumination for construction activities including but not limited to loading or unloading building materials, assembly or disassembly scaffolding and temporary structures, digging trenches, and backfilling holes to prepare for concrete structure. Construction work lights can be arranged in different ways onsite to allow for the most efficient use. Lighting can be fixed to support poles, scaffolding, and tower cranes, or it can be moved and carried by hand.

What lights are used on construction sites?

Depending on whether the construction site exists flammable flying dust or gas, you can use explosion-proof lighting for hazardous sites and industrial lighting for no hazardous sites. Likewise, you can use fixed mounted lighting for areas requesting long-lasting lighting and portable lighting for areas only requesting temporary lighting as below:

• Job site lighting, Class 1 Div 1, explosion-proof portable work light SPL-E series as outdoor work light at the hazardous location of construction sites.

• Temporary lighting for construction sites, NEMA 4X, portable tripod work light TWL series as Jobsite work light at the opening area of construction sites.

• Led outdoor work light, IP66, portable work light PWL series as temporary job site lights at the construction sites.

What is stadium light?

Stadium lights are high watts sports lights mounted at tall heights whose typical height is around 40 to 60 feet and over 100 feet for some major sporting venues, with small beam angles usually ranging from 12-60 degrees. With features, stadium floodlights can radiate higher light intensity within that angle that allowing bright light to reach the ground from elevated heights. Led stadium lights is one of sport court lighting which also covering basketball light, football lights, soccer light, tennis court light, baseball light, pickleball court light.

Which lights are used in sports stadiums?

Led floodlights are used in sports stadium. LEDs typically save around 70% on the cost of electricity when compared with high-pressure sodium or metal halide lights of the same power and produce the same brightness after 5 years to eliminate the need for replacing them frequently, here are some recommendations below:

• Basketball court lights, IP66, led sport light PFM-P series to be used as outdoor basketball lights.

• Led stadium lighting, IP66, led stadium light PFM-S series to be used at large stadiums or playgrounds.

• Foot stadium lights, NEMA 4X, industrial high watts flood lights PFM-E series to be used as football field lights.